Megger AVO410 User Manual download pdf (Page 10)

MAINTENANCE

To clean the instrument, do not immerse in water, periodically wipe the case

with a damp cloth and mild detergent. Dirt in the terminals may affect readings.

Remove the battery if the AVO410 is not to be used for a long period of time.

When the low battery symbol appears on the display, replace the battery.

To replace battery remove instrument from black boot and unscrew two

screws on battery cover to reveal battery.

An internal user replaceable fuse can be accessed for replacement by unscrewing

the four deep recess screws. Carefully separate the two halves of the tester

taking care of battery lead. Use only the recommended replacement fuse

(10 A 500 V 32 mm).

SPECIFICATIONS

General Speciﬁcations

Display: 6000 counts updates 1.5/sec.

Polarity indication: Automatic, positive implied, negative indicated

Overrange indication: “OL” or “-OL”

Low battery indication: Displayed when the battery voltage drops below

operating voltage

Auto power off: Approx 10 minutes

Operating ambient:

Non-condensing ≤10 °C, 11 °C ~ 30 °C (≤80% R.H)

31 °C ~ 40 °C (≤75% R.H), 41 °C ~ 50 °C (≤45%

R.H)

Storage temperature: -20 ºC to 60 ºC, 0 to 80% R.H. when battery removed

from meter

Temperature coefﬁcient: 0.15 x (Spec.Acc’y) / ºC, <18 ºC or > 28 ºC

Power requirements: Standard 9V battery NEDA 1604, IEC6F22, JIS006P

Battery life: Alkaline 300 hours

Dimensions (W x H x D): 76 mm x 158 mm x 38 mm without

holster

82 mm x 164 mm x 44 mm with holster

Weight: 522 g

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

No comments

Megger AVO410 User Manual Page 10